Product is used for removal of lime, magnetite, oxide (corrosion), humus, salt and other contamination.
Also used in piping systems, vacuum systems, heat exchangers, or in a dip-tray. The product has the same effect as acid cleansing on stainless steel. It Kills bacteria in water systems. After treatment, flush the system with water until you achieve a normal pH reading. Then the painting system can be applied as per recommendations.
Reviews
There are no reviews yet.
Be the first to review “Rust & Lime Scale Remover” Cancel reply
Rust & Lime Scale Remover is a liquid with a capability to penetrate; it dissolves corrosion and scale, kills bacteria.
WRITE-OFF is a two-pack water-based coating which can convert almost any paintable surface into an easy erase white board by use of appropriate primers and surface preparation methods. It can be applied on dry wall, wood, cement and metal. Erasable writing space created of WRITE-OFF has great ease of legible writing with white board markers and leave no ghosting marks after erasing.
Content
Recommended use:
Product is used for removal of lime, magnetite, oxide (corrosion), humus, salt and other contamination.
Also used in piping systems, vacuum systems, heat exchangers, or in a dip-tray. The product has the same effect as acid cleansing on stainless steel. It Kills bacteria in water systems. After treatment, flush the system with water until you achieve a normal pH reading. Then the painting system can be applied as per recommendations.
RECOMMENDED USE: Can be used to create dry erase surfaces on walls in offices, meeting room, education institutes, cafeterias, and kid's rooms. * Not to be applied on surfaces/ substrate with continues seepage or dampness
Product benefits:
Transform any paintable surface into white board
Two-pack water-based coating
Extremely durable
Non- yellowing
Easy to clean and maintain
Perfect for creating short throw projections and interactive spaces
*Recoat and drying period may vary under different conditions
WRITE-OFF is a semi gloss coating and the undulations and imperfections of the surface can get magnified if the surface is not smoothened out.
Fill the holes and cracks, straighten the undulations and sand the rough surfaces before application.
Frame the selected area to be painted using suitable painters tape.
For concrete wall use JN wr CEMENT PRIMER and for metal use Jensolin White Primer.
The primer surface should be allowed to dry for minimum of 24 hours and should free from all contaminations.
over the Primer apply recommended coloured or white wall coating emulsion.
Apply the Write-off over the prepared colour/ white emulsion. High quality of colour/ white emulsion paint with rich sheen is recommended for better performance of Write Off. Coat by roller/ spray. Apply one more coat as appropriate.
New concrete, masonry or plaster: Allow the newly constructed cement surface to cure minimum for 30 days prior to application of coating. Always ensure the wall to be painted is dry and devoid of any loosely adhering cement.
Stir the base thoroughly. Mix hardener gradually into the base under continuous stirring as per the mixing ratios. Use potable water for thinning and don't over thin the paint more than the recommended levels
Apply a first coat of Write-off, by diluting with 10-20% water. Allow it to dry for minimum 7-8 hours (25° C / 50% RH)
Apply further coat of WRITE OFF to achieve the desire opacity as well as finish, by diluting with 10-20% water using standard roller or spray. The best finish is obtained when weare apply using air assisted spray technique.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage
Shelf Life:
One year from the date of manufacturing in original tightly closed containers stored away from direct sunlight and
excessive heat.
Pack Sizes:
White: 500ml, 1 L. Other pack sizes available on request.
Reviews
There are no reviews yet.