WRITE-OFF is a two-pack water-based coating which can convert almost any paintable surface into an easy erase white board by use of appropriate primers and surface preparation methods. It can be applied on dry wall, wood, cement and metal. Erasable writing space created of WRITE-OFF has great ease of legible writing with white board markers and leave no ghosting marks after erasing.
RECOMMENDED USE: Can be used to create dry erase surfaces on walls in offices, meeting room, education institutes, cafeterias, and kid's rooms. * Not to be applied on surfaces/ substrate with continues seepage or dampness
Product benefits:
Transform any paintable surface into white board
Two-pack water-based coating
Extremely durable
Non- yellowing
Easy to clean and maintain
Perfect for creating short throw projections and interactive spaces
*Recoat and drying period may vary under different conditions
WRITE-OFF is a semi gloss coating and the undulations and imperfections of the surface can get magnified if the surface is not smoothened out.
Fill the holes and cracks, straighten the undulations and sand the rough surfaces before application.
Frame the selected area to be painted using suitable painters tape.
For concrete wall use JN wr CEMENT PRIMER and for metal use Jensolin White Primer.
The primer surface should be allowed to dry for minimum of 24 hours and should free from all contaminations.
over the Primer apply recommended coloured or white wall coating emulsion.
Apply the Write-off over the prepared colour/ white emulsion. High quality of colour/ white emulsion paint with rich sheen is recommended for better performance of Write Off. Coat by roller/ spray. Apply one more coat as appropriate.
New concrete, masonry or plaster: Allow the newly constructed cement surface to cure minimum for 30 days prior to application of coating. Always ensure the wall to be painted is dry and devoid of any loosely adhering cement.
Stir the base thoroughly. Mix hardener gradually into the base under continuous stirring as per the mixing ratios. Use potable water for thinning and don't over thin the paint more than the recommended levels
Apply a first coat of Write-off, by diluting with 10-20% water. Allow it to dry for minimum 7-8 hours (25° C / 50% RH)
Apply further coat of WRITE OFF to achieve the desire opacity as well as finish, by diluting with 10-20% water using standard roller or spray. The best finish is obtained when weare apply using air assisted spray technique.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage
Shelf Life:
One year from the date of manufacturing in original tightly closed containers stored away from direct sunlight and
excessive heat.
Pack Sizes:
White: 500ml, 1 L. Other pack sizes available on request.
WRITE-OFF is a two-pack water-based coating which can convert almost any paintable surface into an easy erase white board by use of appropriate primers and surface preparation methods. It can be applied on dry wall, wood, cement and metal. Erasable writing space created of WRITE-OFF has great ease of legible writing with white board markers and leave no ghosting marks after erasing.
Rust & Lime Scale Remover is a liquid with a capability to penetrate; it dissolves corrosion and scale, kills bacteria.
Sheenlac Water based PU exterior wood coating is an 1K PU clear designed to provide excellent protection for all types of outdoor wood projects from UV rays, weathering, temperature changes and humidity.
Available in 30 and 60 gloss levels
Durable UV protection for Wood
Protection from temperature changes and humidity
Sheenlac Paint Remover is a solvent-based wax type stripper, acting on all types of paint films even on vertical substrate.
Direction of Use:
Make deep cuts on the old paint surface using a sharp edge knife / putty blade. Shake the content well before use. No dilution is required. Apply the paint remover by brush as a thin layer and allow it to react for 10-15 mins. Use a putty knife to remove the lifted area and use mild force to remove the loose paint. Repeat the procedure till you get to the bare substrate. After thorough removal of paint, use plenty of water and soap to rinse off and clean. If used on wood, wipe-off with cloth, soaked in Sheenlac Enamel/ N.C Thinner D-13x
Jenson & Nicholson Universal Cement Primer, a white coloured primer is exclusively designed for application on interior and exterior walls made of sand, cement plaster, asbestos, bricks, etc. The product covers stains and discolourations. Moreover, it hides surface marks and darker colours.
RECOMMENDED USE: Can be used to create dry erase surfaces on walls in offices, meeting room, education institutes, cafeterias, and kid's rooms. * Not to be applied on surfaces/ substrate with continues seepage or dampness
Product benefits:
Transform any paintable surface into white board
Two-pack water-based coating
Extremely durable
Non- yellowing
Easy to clean and maintain
Perfect for creating short throw projections and interactive spaces
*Recoat and drying period may vary under different conditions
WRITE-OFF is a semi gloss coating and the undulations and imperfections of the surface can get magnified if the surface is not smoothened out.
Fill the holes and cracks, straighten the undulations and sand the rough surfaces before application.
Frame the selected area to be painted using suitable painters tape.
For concrete wall use JN wr CEMENT PRIMER and for metal use Jensolin White Primer.
The primer surface should be allowed to dry for minimum of 24 hours and should free from all contaminations.
over the Primer apply recommended coloured or white wall coating emulsion.
Apply the Write-off over the prepared colour/ white emulsion. High quality of colour/ white emulsion paint with rich sheen is recommended for better performance of Write Off. Coat by roller/ spray. Apply one more coat as appropriate.
New concrete, masonry or plaster: Allow the newly constructed cement surface to cure minimum for 30 days prior to application of coating. Always ensure the wall to be painted is dry and devoid of any loosely adhering cement.
Stir the base thoroughly. Mix hardener gradually into the base under continuous stirring as per the mixing ratios. Use potable water for thinning and don't over thin the paint more than the recommended levels
Apply a first coat of Write-off, by diluting with 10-20% water. Allow it to dry for minimum 7-8 hours (25° C / 50% RH)
Apply further coat of WRITE OFF to achieve the desire opacity as well as finish, by diluting with 10-20% water using standard roller or spray. The best finish is obtained when weare apply using air assisted spray technique.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage
Shelf Life:
One year from the date of manufacturing in original tightly closed containers stored away from direct sunlight and
excessive heat.
Pack Sizes:
White: 500ml, 1 L. Other pack sizes available on request.
Keep containers upright, tightly closed in a cool, dry, well ventilated location
Keep opened containers closed and tightly closed when not in use
Store away from heat source, direct sunlight and other flammable materials
Keep out of reach of children & pets. Do not store near food, drinks or animal feed
Do not mix with incompatible materials
Wear appropriate body, eye and respiratory protection equipment
Work in a well ventilated area. Do not breathe vapour or sprayed contents
Skin contact may cause irritation. In case of skin contact wash immediately with water
In case of eye contact, wash immediately with plenty of water and seek immediate medical attention
Dispose any spilled or unused paint, containers through appropriate disposal agency
Do not dispose spillages or unused paint in drain ,water bodies and landfill
Recommended use:
Product is used for removal of lime, magnetite, oxide (corrosion), humus, salt and other contamination.
Also used in piping systems, vacuum systems, heat exchangers, or in a dip-tray. The product has the same effect as acid cleansing on stainless steel. It Kills bacteria in water systems. After treatment, flush the system with water until you achieve a normal pH reading. Then the painting system can be applied as per recommendations.
RECOMMENDED USE: Aspire interior is the perfect choice for dark colored commercial and household furniture, high end kitchen cabinetry, bathroom vanities, doors, Table tops, Bar tops, music instruments, sports goods, and other interior wood surfaces that require a hard durable finish. Not recommend on light / pale colored wood.
*Recoat and drying period may vary under different conditions
Apply suitable putty wherever required to fill the undulation / dent to make the surface flat and apply BP-2400 1 K primer grey / BP-5000 2 K primer grey
Apply Bodyian base coat colour and provide flash off time of 10 – 15 mins
Apply suitable Bodyian clear coat as per suggested ratio
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage
Shelf Life:
24 months from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
RECOMMENDED USE: Jenson & Nicholson Rainbow Acrylic Emulsion is perfect for interior surfaces like plastered surface, ceilings, asbestos and hard boards.
130-150* sq ft / litre for two coat finish under normal conditions
*Actual coverage may vary due to factors such as method and condition of application, surface roughness and porosity and weather conditions.
Ensure that the surface is free from dust, dirt, chalking, oil, grease, loosely bound particles or any other contamination.
Ensure removal of Algae and Fungal growth, if any using wire brushing and bio wash solution.
Sand the glossy surface using Emery Paper 180, as it results in a roughened surface for good adhesion of the primer to the surface.
New concrete, masonry or plaster: Allow the newly constructed cement surface to cure for minimum of 30 days, prior to application of J&N Acrylic Base Water Thinnable Cement Primer. Ensure that the wall to be painted is completely dry and free from any cement residue.
1. Apply one coat of J&N Acrylic Base Water Thinnable Cement Primer at the recommended dilution level, using standard brush or spray application. Let it dry for minimum 4-5 hours and then apply Jensolin White Cement based Wall Putty using Putty Knife. Allow it to dry for 4-6 hrs. Follow this with one more coat of J&N Acrylic Base Water Thinnable Cement Primer.
Dilute Jenson & Nicholson Rainbow Acrylic Emulsion as per the recommended ratio and apply the first coat. Let it dry for 4-5 hrs and if required, apply a second coat.
Ensure proper washing and cleaning of all dust, Algal and Fungal growth at regular intervals of 5-6 months, for longer durability and better retention of aesthetics.
Reviews
There are no reviews yet.