Sale!
In Stock

Water Based Timber Filler

150.00

Water Based Timber Filler is an alkyd based, semi solid paste that fills minor imperfections on the surface and improves top coat adhesion and appearance.

RECOMMENDED USE: Water based timber filler is mostly used on wooden surfaces.

Description

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

Reviews

There are no reviews yet.

Be the first to review “Water Based Timber Filler”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsWater Based Timber Filler removeJN ANTI RUST METAL PRIMER removeWater-based Impregnation Clear removeWrite Off removeWater Based Penetrative Wood Stainer removeStyl Plus 1K PU Wood Finish (Int/Ext) remove
Image
SKU
Rating
Price 150.00126.006,061.00180.00350.00960.00990.0070.0013,280.00113.001,800.00
Stock
Availability
Add to cart

Select options

Select options

Select options

Select options

Select options

Select options

DescriptionWater Based Timber Filler is an alkyd based, semi solid paste that fills minor imperfections on the surface and improves top coat adhesion and appearance. RECOMMENDED USE: Water based timber filler is mostly used on wooden surfaces.Sheenlac Water based Impregnation Clear is a Transparent Coating used on saturated, soaked or weathered wood. RECOMMENDED USE: Water based Impregnation clear is mostly used on wooden surfaces that have undergone.WRITE-OFF is a two-pack water-based coating which can convert almost any paintable surface into an easy erase white board by use of appropriate primers and surface preparation methods. It can be applied on dry wall, wood, cement and metal. Erasable writing space created of WRITE-OFF has great ease of legible writing with white board markers and leave no ghosting marks after erasing.Sheenlac Water Based Penetrative Wood Stainer is a ready to use product; has been created exclusively for interior woodworks. It enhances the appeal of wood without compromising on its natural looks. It can be used with Polyurethane and melamine finishes and is available in a range of 6 shades. Features and Benefits: • 14 vibrant wood tones available for Interiors. • All are Inter-mixable and create a new desired tone as per one’s taste. • Solvent-based wood stains won’t raise the grain on the wood, so you won’t need to worry about sanding the finish.Sheenlac Styl Plus Exterior 1K Alkyd Polyurethane, formulated with UV absorbers and antioxidant provides resistance against challenging conditions like harsh sunlight, heat, cold and moisture. Appearing dark purple in color in the can, this product dries clear and lends a stylish look to your wooden furniture!
  • Low Odour
  •  Good Gloss Retention
  •  Water Resistance
Content

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

Color

White & Clear

Gloss / sheen

Semi Glossy

Drying Temperature

25°C / 50% RH

Dry Film Thickness

60 - 80 ㎛ in 2 coats

Mixing ratio

1.5:1 by volume (Base : Hardener)

Application method

Brush, Roller & Air Spray

Full cure

7 days (3 days before applying any markings)

Pot life

Minimum 60 mins

Set to Touch

4 - 6 hours

Dry Hard

16 - 18 hours

RECOMMENDED USE: Can be used to create dry erase surfaces on walls in offices, meeting room, education institutes, cafeterias, and kid's rooms.
* Not to be applied on surfaces/ substrate with continues seepage or dampness

Product benefits:
  1.  Transform any paintable surface into white board
  2.  Two-pack water-based coating
  3.  Extremely durable
  4.  Non- yellowing
  5.  Easy to clean and maintain
  6.  Perfect for creating short throw projections and interactive spaces

*Recoat and drying period may vary under different conditions
WRITE-OFF is a semi gloss coating and the undulations and imperfections of the surface can get magnified if the surface is not smoothened out.
  • Fill the holes and cracks, straighten the undulations and sand the rough surfaces before application.
  •  Frame the selected area to be painted using suitable painters tape.
  •  For concrete wall use JN wr CEMENT PRIMER and for metal use Jensolin White Primer.
  •  The primer surface should be allowed to dry for minimum of 24 hours and should free from all contaminations.
  •  over the Primer apply recommended coloured or white wall coating emulsion.
  •  Apply the Write-off over the prepared colour/ white emulsion. High quality of colour/ white emulsion paint with rich sheen is recommended for better performance of Write Off. Coat by roller/ spray. Apply one more coat as appropriate.
New concrete, masonry or plaster: Allow the newly constructed cement surface to cure minimum for 30 days prior to application of coating. Always ensure the wall to be painted is dry and devoid of any loosely adhering cement.
  • Stir the base thoroughly. Mix hardener gradually into the base under continuous stirring as per the mixing ratios. Use potable water for thinning and don't over thin the paint more than the recommended levels
  •  Apply a first coat of Write-off, by diluting with 10-20% water. Allow it to dry for minimum 7-8 hours (25° C / 50% RH)
  •  Apply further coat of WRITE OFF to achieve the desire opacity as well as finish, by diluting with 10-20% water using standard roller or spray. The best finish is obtained when weare apply using air assisted spray technique.
  • After application the applied surface needs to be left in ambient conditions for 3 days before it can be used as an erasable surface.
  •  Use duster or a lint free cloth to wipe and avoid using any abrasive material or solvent wiping to erase.
  •  If after erasing retain "ghost marks", use our Write off cleaning solution to remove the marks.
  •  Use Write off cleaning solution every 15 days and change the duster as appropriate period for better erasing.

Storage and Transportation:

Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage

Shelf Life:

One year from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.

Pack Sizes:

White: 500ml, 1 L. Other pack sizes available on request.
  1. After application the applied surface needs to be left in ambient conditions for 3 days before it can be used as an erasable surface.
  2. Use duster or a lint free cloth to wipe and avoid using any abrasive material or solvent wiping to erase.
  3.  If after erasing retain "ghost marks", use our Write off cleaning solution to remove the marks.
  4.  Use Write off cleaning solution every 15 days and change the duster as appropriate period for better erasing.
  • Keep containers upright, tightly closed in a cool, dry, well ventilated location
  •  Keep opened containers closed and tightly closed when not in use
  •  Store away from heat source, direct sunlight and other flammable materials
  • Keep out of reach of children & pets. Do not store near food, drinks or animal feed
  • Do not mix with incompatible materials
  • Wear appropriate body, eye and respiratory protection equipment
  • Work in a well ventilated area. Do not breathe vapour or sprayed contents
  • Skin contact may cause irritation. In case of skin contact wash immediately with water
  • In case of eye contact, wash immediately with plenty of water and seek immediate medical attention
  • Dispose any spilled or unused paint, containers through appropriate disposal agency
  • Do not dispose spillages or unused paint in drain ,water bodies and landfill

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

Gloss level @ 60˚

Gloss: 90 | Matt: 15-20

Drying Temperature

@30˚ C and 60% RH

Application method

Spray

 

Tack free

3 Hours

Surface Dry

10 - 15 minutes

Overcoat interval

8 -12 Hours



RECOMMENDED USE: Aspire interior is the perfect choice for dark colored commercial and household furniture, high end kitchen cabinetry, bathroom vanities, doors, Table tops, Bar tops, music instruments, sports goods, and other interior wood surfaces that require a hard durable finish. Not recommend on light / pale colored wood.


*Recoat and drying period may vary under different conditions
Sq ft / L / Coat

*Performance may vary due to factors such as method of application, surface roughness and porosity.
  1. Alkali Resistant
  2. Excellent Sealing Properties
  3.  Excellent Coverage
  4.  Quick Drying
  5.  Excellent Top coat Holding
  1. Apply MP-300 plastic primer on plastic substrate
  2. Apply suitable putty wherever required to fill the undulation / dent to make the surface flat and apply BP-2400 1 K primer grey / BP-5000 2 K primer grey
  3.  Apply Bodyian base coat colour and provide flash off time of 10 – 15 mins
  4.  Apply suitable Bodyian clear coat as per suggested ratio
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3.  If accidental contact with skin should occur, wash immediately with soap and water.
  4.  Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5.  Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6.  Do not smoke while painting.
  7.  Flammable. Store in a cool dry place away from heat and sparks.
  8.  Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage

Shelf Life: 24 months from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Size

1 Kg

Finish

Mahogany, Natural, Oak, Teak, Walnut

Size

500 ml, 1 Ltr, 4 Ltr, 20 Ltr

Finish

SUPERIOR RED OXIDE PRIMER, ZINC PRIMER YELLOW

Size

500 ml, 1 Ltr

Size

500 ml

Colour

Clear, White

Size

100 ml, 20 Ltr

Finish

Black, Burma Teak, Larch Teak, Mahogany, Teak, Walnut

Size

200 ml, 500 ml, 1 Ltr, 4 Ltr

Finish

Glossy, Glossy-Oak Yellow, Glossy-Redbrown, Glossy-RS-Wood, Glossy-Teak, Glossy-WallNut, Matt

Usage

Doors/Windows, Floors