In Stock

Styl Plus 1K PU Wood Finish (Int/Ext)

113.001,800.00

Sheenlac Styl Plus Exterior 1K Alkyd Polyurethane, formulated with UV absorbers and antioxidant provides resistance against challenging conditions like harsh sunlight, heat, cold and moisture. Appearing dark purple in color in the can, this product dries clear and lends a stylish look to your wooden furniture!

  • Low Odour
  •  Good Gloss Retention
  •  Water Resistance

Description

Gloss level @ 60˚

Gloss: 90 | Matt: 15-20

Drying Temperature

@30˚ C and 60% RH

Application method

Spray

 

Tack free

3 Hours

Surface Dry

10 - 15 minutes

Overcoat interval

8 -12 Hours



RECOMMENDED USE: Aspire interior is the perfect choice for dark colored commercial and household furniture, high end kitchen cabinetry, bathroom vanities, doors, Table tops, Bar tops, music instruments, sports goods, and other interior wood surfaces that require a hard durable finish. Not recommend on light / pale colored wood.


*Recoat and drying period may vary under different conditions
Sq ft / L / Coat

*Performance may vary due to factors such as method of application, surface roughness and porosity.
  1. Alkali Resistant
  2. Excellent Sealing Properties
  3.  Excellent Coverage
  4.  Quick Drying
  5.  Excellent Top coat Holding
  1. Apply MP-300 plastic primer on plastic substrate
  2. Apply suitable putty wherever required to fill the undulation / dent to make the surface flat and apply BP-2400 1 K primer grey / BP-5000 2 K primer grey
  3.  Apply Bodyian base coat colour and provide flash off time of 10 – 15 mins
  4.  Apply suitable Bodyian clear coat as per suggested ratio
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3.  If accidental contact with skin should occur, wash immediately with soap and water.
  4.  Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5.  Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6.  Do not smoke while painting.
  7.  Flammable. Store in a cool dry place away from heat and sparks.
  8.  Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage

Shelf Life: 24 months from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.

Reviews

There are no reviews yet.

Be the first to review “Styl Plus 1K PU Wood Finish (Int/Ext)”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsStyl Plus 1K PU Wood Finish (Int/Ext) removeWater Based Penetrative Wood Stainer removeWater Based Wood Polish removeWater Based Timber Filler removeWater Based 1K Exterior Wood Coating removeAerozol Spray Paint remove
Image
SKU
Rating
Price113.001,800.0070.0013,280.00245.00480.00 150.00330.0016,014.00206.00250.00
Stock

Available on backorder

AvailabilityAvailable on backorder
Add to cart

Select options

Select options

Select options

Select options

Select options

Select options

DescriptionSheenlac Styl Plus Exterior 1K Alkyd Polyurethane, formulated with UV absorbers and antioxidant provides resistance against challenging conditions like harsh sunlight, heat, cold and moisture. Appearing dark purple in color in the can, this product dries clear and lends a stylish look to your wooden furniture!
  • Low Odour
  •  Good Gloss Retention
  •  Water Resistance
Sheenlac Water Based Penetrative Wood Stainer is a ready to use product; has been created exclusively for interior woodworks. It enhances the appeal of wood without compromising on its natural looks. It can be used with Polyurethane and melamine finishes and is available in a range of 6 shades. Features and Benefits: • 14 vibrant wood tones available for Interiors. • All are Inter-mixable and create a new desired tone as per one’s taste. • Solvent-based wood stains won’t raise the grain on the wood, so you won’t need to worry about sanding the finish.Sheenlac Water based (WB) Interior heavy duty wood polish is an easy-to-use product at an economical cost factor that dries very quickly to a crystal-clear film. It has very low environmental impact during and after application.
  • Odourless
  • Non-flammable
  • Durable
  • DIY product
Water Based Timber Filler is an alkyd based, semi solid paste that fills minor imperfections on the surface and improves top coat adhesion and appearance. RECOMMENDED USE: Water based timber filler is mostly used on wooden surfaces.Sheenlac Water based PU exterior wood coating is an 1K PU clear designed to provide excellent protection for all types of outdoor wood projects from UV rays, weathering, temperature changes and humidity.
  • Available in 30 and 60 gloss levels
  • Durable UV protection for Wood
  • Protection from temperature changes and humidity
Aerosol is a ready to use spray paint supplied in spray containers.
Content

Gloss level @ 60˚

Gloss: 90 | Matt: 15-20

Drying Temperature

@30˚ C and 60% RH

Application method

Spray

 

Tack free

3 Hours

Surface Dry

10 - 15 minutes

Overcoat interval

8 -12 Hours



RECOMMENDED USE: Aspire interior is the perfect choice for dark colored commercial and household furniture, high end kitchen cabinetry, bathroom vanities, doors, Table tops, Bar tops, music instruments, sports goods, and other interior wood surfaces that require a hard durable finish. Not recommend on light / pale colored wood.


*Recoat and drying period may vary under different conditions
Sq ft / L / Coat

*Performance may vary due to factors such as method of application, surface roughness and porosity.
  1. Alkali Resistant
  2. Excellent Sealing Properties
  3.  Excellent Coverage
  4.  Quick Drying
  5.  Excellent Top coat Holding
  1. Apply MP-300 plastic primer on plastic substrate
  2. Apply suitable putty wherever required to fill the undulation / dent to make the surface flat and apply BP-2400 1 K primer grey / BP-5000 2 K primer grey
  3.  Apply Bodyian base coat colour and provide flash off time of 10 – 15 mins
  4.  Apply suitable Bodyian clear coat as per suggested ratio
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3.  If accidental contact with skin should occur, wash immediately with soap and water.
  4.  Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5.  Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6.  Do not smoke while painting.
  7.  Flammable. Store in a cool dry place away from heat and sparks.
  8.  Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage

Shelf Life: 24 months from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

Gloss level @ 60˚

Gloss: 90 | Matt: 15-20

Drying Temperature

@30˚ C and 60% RH

Application method

Spray

 

Tack free

3 Hours

Surface Dry

10 - 15 minutes

Overcoat interval

8 -12 Hours



RECOMMENDED USE: Aspire interior is the perfect choice for dark colored commercial and household furniture, high end kitchen cabinetry, bathroom vanities, doors, Table tops, Bar tops, music instruments, sports goods, and other interior wood surfaces that require a hard durable finish. Not recommend on light / pale colored wood.


*Recoat and drying period may vary under different conditions
Sq ft / L / Coat

*Performance may vary due to factors such as method of application, surface roughness and porosity.
  1. Alkali Resistant
  2. Excellent Sealing Properties
  3.  Excellent Coverage
  4.  Quick Drying
  5.  Excellent Top coat Holding
  1. Apply MP-300 plastic primer on plastic substrate
  2. Apply suitable putty wherever required to fill the undulation / dent to make the surface flat and apply BP-2400 1 K primer grey / BP-5000 2 K primer grey
  3.  Apply Bodyian base coat colour and provide flash off time of 10 – 15 mins
  4.  Apply suitable Bodyian clear coat as per suggested ratio
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3.  If accidental contact with skin should occur, wash immediately with soap and water.
  4.  Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5.  Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6.  Do not smoke while painting.
  7.  Flammable. Store in a cool dry place away from heat and sparks.
  8.  Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage

Shelf Life: 24 months from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Product details: 1. Ready to spray paint supplied in a spray can 2. Quick drying and provide excellent coverage and gloss 3. Products : Primer for metal and Finish Paint 4. Suitable for metal,plastics and wood 5. Colours available 16 6. Has two spray nozzle , one for narrow spray and another for broad spray which will help to optimise consumption and reduction in cost
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Size

200 ml, 500 ml, 1 Ltr, 4 Ltr

Finish

Glossy, Glossy-Oak Yellow, Glossy-Redbrown, Glossy-RS-Wood, Glossy-Teak, Glossy-WallNut, Matt

Usage

Doors/Windows, Floors

Size

100 ml, 20 Ltr

Finish

Black, Burma Teak, Larch Teak, Mahogany, Teak, Walnut

Size

500 ml, 1 Ltr

Finish

Glossy, Matt, Satin

Size

1 Kg

Finish

Mahogany, Natural, Oak, Teak, Walnut

Size

500 ml, 1 Ltr, 20 Ltr

Finish

Matt, Satin, Semi Glossy

Size

400 ml

Colour

Anodised Bronze, Apple Green, Black, Bright Red, C Mens Grey, Chrome, Clear, Clear Coat, D A Grey, Duchess Gold, Flat Black, Flat White, Fluorescent Yellow, Green, Ivory, Jet Black, Light Grey, Medium Blue, Medium Green, Metallic Black Knight, Metallic Blue, Metallic Montana Red, Orange, P.-Blue, Pastel Green, Pastel Yellow, Pink, Plastic Primer Grey, Primer Surfacer Grey, Red, Signal Yellow, SIlver, Smoke Grey, White