Sheenlac Mel’myn Plus acid catalyzed melamine finish is a solvent based 2 pack, high solids, alkyd/urea formaldehyde acid catalyzed wood polish. The product is developed for ease of use, in different gloss levels with low formaldehyde emission during application and drying and from the cured film.
RECOMMENDED USE: High end kitchen cabinetry, bathroom vanities, table tops, dining and bedroom furniture, millwork, office furniture and store fixtures.
Apply suitable putty wherever required to fill the undulation / dent to make the surface flat and apply BP-2400 1 K primer grey / BP-5000 2 K primer grey
Apply Bodyian base coat colour and provide flash off time of 10 – 15 mins
Apply suitable Bodyian clear coat as per suggested ratio
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage
Shelf Life:
24 months from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Reviews
There are no reviews yet.
Be the first to review “Mel’Myn Plus Interior Wood Finish” Cancel reply
Sheenlac Mel’myn Plus acid catalyzed melamine finish is a solvent based 2 pack, high solids, alkyd/urea formaldehyde acid catalyzed wood polish. The product is developed for ease of use, in different gloss levels with low formaldehyde emission during application and drying and from the cured film.
Good yellowing resistant & high gloss retention
Excellent durability with smooth finishing
Resistance to water and household chemical
Sheenlac Water based (WB) Interior heavy duty wood polish is an easy-to-use product at an economical cost factor that dries very quickly to a crystal-clear film. It has very low environmental impact during and after application.
Odourless
Non-flammable
Durable
DIY product
Sheenlac Water based Impregnation Clear is a Transparent Coating used on saturated, soaked or weathered wood.
RECOMMENDED USE: Water based Impregnation clear is mostly used on wooden surfaces that have undergone.
Sheenlac Water based (WB) Interior heavy duty wood polish is an easy-to-use product at an economical cost factor that dries very quickly to a crystal-clear film. It has very low environmental impact during and after application.
Odourless
Non-flammable
Durable
DIY product
WRITE-OFF is a two-pack water-based coating which can convert almost any paintable surface into an easy erase white board by use of appropriate primers and surface preparation methods. It can be applied on dry wall, wood, cement and metal. Erasable writing space created of WRITE-OFF has great ease of legible writing with white board markers and leave no ghosting marks after erasing.
Sheenlac Paint Remover is a solvent-based wax type stripper, acting on all types of paint films even on vertical substrate.
Direction of Use:
Make deep cuts on the old paint surface using a sharp edge knife / putty blade. Shake the content well before use. No dilution is required. Apply the paint remover by brush as a thin layer and allow it to react for 10-15 mins. Use a putty knife to remove the lifted area and use mild force to remove the loose paint. Repeat the procedure till you get to the bare substrate. After thorough removal of paint, use plenty of water and soap to rinse off and clean. If used on wood, wipe-off with cloth, soaked in Sheenlac Enamel/ N.C Thinner D-13x
RECOMMENDED USE: High end kitchen cabinetry, bathroom vanities, table tops, dining and bedroom furniture, millwork, office furniture and store fixtures.
Apply suitable putty wherever required to fill the undulation / dent to make the surface flat and apply BP-2400 1 K primer grey / BP-5000 2 K primer grey
Apply Bodyian base coat colour and provide flash off time of 10 – 15 mins
Apply suitable Bodyian clear coat as per suggested ratio
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage
Shelf Life:
24 months from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work.
Not recommended for exterior use due to its limited UV Resistance.
RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work.
Not recommended for exterior use due to its limited UV Resistance.
*Recoat and drying period may vary under different conditions
Reveals the highlights of well grained timber.
Good water resistance property.
100% Lead free.
They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish.
PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage
Shelf Life:
2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work.
Not recommended for exterior use due to its limited UV Resistance.
RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work.
Not recommended for exterior use due to its limited UV Resistance.
RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work.
Not recommended for exterior use due to its limited UV Resistance.
*Recoat and drying period may vary under different conditions
Reveals the highlights of well grained timber.
Good water resistance property.
100% Lead free.
They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish.
PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage
Shelf Life:
2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work.
Not recommended for exterior use due to its limited UV Resistance.
RECOMMENDED USE: Can be used to create dry erase surfaces on walls in offices, meeting room, education institutes, cafeterias, and kid's rooms. * Not to be applied on surfaces/ substrate with continues seepage or dampness
Product benefits:
Transform any paintable surface into white board
Two-pack water-based coating
Extremely durable
Non- yellowing
Easy to clean and maintain
Perfect for creating short throw projections and interactive spaces
*Recoat and drying period may vary under different conditions
WRITE-OFF is a semi gloss coating and the undulations and imperfections of the surface can get magnified if the surface is not smoothened out.
Fill the holes and cracks, straighten the undulations and sand the rough surfaces before application.
Frame the selected area to be painted using suitable painters tape.
For concrete wall use JN wr CEMENT PRIMER and for metal use Jensolin White Primer.
The primer surface should be allowed to dry for minimum of 24 hours and should free from all contaminations.
over the Primer apply recommended coloured or white wall coating emulsion.
Apply the Write-off over the prepared colour/ white emulsion. High quality of colour/ white emulsion paint with rich sheen is recommended for better performance of Write Off. Coat by roller/ spray. Apply one more coat as appropriate.
New concrete, masonry or plaster: Allow the newly constructed cement surface to cure minimum for 30 days prior to application of coating. Always ensure the wall to be painted is dry and devoid of any loosely adhering cement.
Stir the base thoroughly. Mix hardener gradually into the base under continuous stirring as per the mixing ratios. Use potable water for thinning and don't over thin the paint more than the recommended levels
Apply a first coat of Write-off, by diluting with 10-20% water. Allow it to dry for minimum 7-8 hours (25° C / 50% RH)
Apply further coat of WRITE OFF to achieve the desire opacity as well as finish, by diluting with 10-20% water using standard roller or spray. The best finish is obtained when weare apply using air assisted spray technique.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage
Shelf Life:
One year from the date of manufacturing in original tightly closed containers stored away from direct sunlight and
excessive heat.
Pack Sizes:
White: 500ml, 1 L. Other pack sizes available on request.
Gloss: 90 | Matt: 20-25
@30˚ C and 60% RH
Spray
Padding
2 minutes
30 minutes
White & Clear
60 - 80 ㎛ in 2 coats
1.5:1 by volume (Base : Hardener)
Brush, Roller & Air Spray
7 days (3 days before applying any markings)
Minimum 60 mins
Reviews
There are no reviews yet.