In Stock

JN ANTI RUST METAL PRIMER

₹126.00 – ₹6,061.00

SKU: N/A Categories: , , , , Tag:

Reviews

There are no reviews yet.

Be the first to review “JN ANTI RUST METAL PRIMER”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsJN ANTI RUST METAL PRIMER removeBrolac Hi-Gloss - Polyurethane Enamel removeWater Based Wood Polish removeWater-based Impregnation Clear removeWater Based Timber Filler removeBrolac Quick Dry PU Enamel remove
Image
SKU
Rating
Price₹126.00 – ₹6,061.00₹100.00 – ₹20,000.00₹245.00 – ₹480.00₹180.00 – ₹350.00 ₹150.00₹114.00 – ₹8,010.00
Stock

Out of stock

AvailabilityOut of stock
Add to cart

Select options

Select options

Select options

Select options

Select options

Select options

DescriptionBrolac Hi-Gloss Polyurethane Enamel is a high gloss paint with excellent film integrity and built-in toughness. With abrasion and chemical resistance properties, it gives a long lasting, luxurious, brilliant glossy finish. Sheenlac Water based (WB) Interior heavy duty wood polish is an easy-to-use product at an economical cost factor that dries very quickly to a crystal-clear film. It has very low environmental impact during and after application.
  • Odourless
  • Non-flammable
  • Durable
  • DIY product
Sheenlac Water based Impregnation Clear is a Transparent Coating used on saturated, soaked or weathered wood. RECOMMENDED USE: Water based Impregnation clear is mostly used on wooden surfaces that have undergone.Water Based Timber Filler is an alkyd based, semi solid paste that fills minor imperfections on the surface and improves top coat adhesion and appearance. RECOMMENDED USE: Water based timber filler is mostly used on wooden surfaces.Brolac Quick Dry Polyurethane Enamel is an advanced glossy paint with excellent film integrity and built-in toughness. It provides a long lasting, luxurious and brilliant glossy finish.
Content

Color

White & Colors

Gloss / sheen

85 – 95 Gloss Unit at 60° Gloss Head

Drying Temperature

25°C / 50% RH
  RECOMMENDED USE: Brolac Hi- Gloss Polyurethane Enamel can be used on metal, masonry and wooden surfaces. Product benefits:
  1. Hi-gloss finish
  2. Recommended as a top-coat for mild corrosive environment over suitable primers
  3.  Excellent levelling and application properties
100-110* sq. ft. / litre for 1 coat finish under normal conditions *Actual coverage may vary due to factors such as method and condition of application, surface roughness and porosity and weather conditions.
  1. Ensure that the surface is free from dirt, grease, rust and moisture.
  2. Sand the surface using Emery Paper 180 to remove loosely bound particles, rust, peeling or flaking paint, etc.
  3.  Wipe the surface clean.
PRIMING Ferrous Metal Surface: Apply 1-2 coats of J&N Superior Red Oxide Primer on the metal surface by thinning (If necessary). Allow drying for 8-10 hrs after each coat. Non-Ferrous Metal Surface: Apply 1-2 coats of J&N Zinc Primer Yellow on the metal surface, by thinning it with J&N GP Thinner, if necessary. Let it dry for 5-6 hrs. Wooden Surface: Apply first coat of Jensolin Pink/White Primer on the wooden surface by thinning with J&N GP thinner (if required). Let it dry for 8-10 hrs. Use suitable putty to fill minor cracks, dents or holes. After drying, use Emery Paper 180 to sand the surface. Apply another coat of J&N Pink/White Primer. Allow it to dry for 8-10 hrs. Masonry Surface: Apply first coat of Jensolin Pink/White Primer on the surface by thinning with J&N GP thinner (if necessary). Let it dry for 8-10 hrs.
Apply two coats of Brolac Hi- Gloss Polyurethane Enamel, after thorough stirring and diluting (if required). Maintain an interval of 6-8 hrs between successive coats.
  1. Do not over thin the paint above recommended dilution levels.
  2. Stir the paint properly, before use.
  3.  Seal the container, when not in use.
  4.  Clean the application tools immediately after use.
  1. Ensure drying time of a week, before cleaning.
  2. Remove stains using clean sponge and mild soap solution
  3.  Wipe clean.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: One year from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes
RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes
RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes
RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

Color

White & Colors

Gloss / sheen

85 – 95 Gloss Unit at 60° Gloss Head

Drying Temperature

25°C / 50% RH
  RECOMMENDED USE: Brolac Hi- Gloss Polyurethane Enamel can be used on metal, masonry and wooden surfaces.

Product benefits:
  1. Hi-gloss finish
  2. Recommended as a top-coat for mild corrosive environment over suitable primers
  3.  Excellent levelling and application properties
100-110* sq. ft. / litre for 1 coat finish under normal conditions *Actual coverage may vary due to factors such as method and condition of application, surface roughness and porosity and weather conditions.
  1. Ensure that the surface is free from dirt, grease, rust and moisture.
  2. Sand the surface using Emery Paper 180 to remove loosely bound particles, rust, peeling or flaking paint, etc.
  3.  Wipe the surface clean.
PRIMING Ferrous Metal Surface: Apply 1-2 coats of J&N Superior Red Oxide Primer on the metal surface by thinning (If necessary). Allow drying for 8-10 hrs after each coat. Non-Ferrous Metal Surface: Apply 1-2 coats of J&N Zinc Primer Yellow on the metal surface, by thinning it with J&N GP Thinner, if necessary. Let it dry for 5-6 hrs. Wooden Surface: Apply first coat of Jensolin Pink/White Primer on the wooden surface by thinning with J&N GP thinner (if required). Let it dry for 8-10 hrs. Use suitable putty to fill minor cracks, dents or holes. After drying, use Emery Paper 180 to sand the surface. Apply another coat of J&N Pink/White Primer. Allow it to dry for 8-10 hrs. Masonry Surface: Apply first coat of Jensolin Pink/White Primer on the surface by thinning with J&N GP thinner (if necessary). Let it dry for 8-10 hrs.
Apply two coats of Brolac Hi- Gloss Polyurethane Enamel, after thorough stirring and diluting (if required). Maintain an interval of 6-8 hrs between successive coats.
  1. Do not over thin the paint above recommended dilution levels.
  2. Stir the paint properly, before use.
  3.  Seal the container, when not in use.
  4.  Clean the application tools immediately after use.
  1. Ensure drying time of a week, before cleaning.
  2. Remove stains using clean sponge and mild soap solution
  3.  Wipe clean.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: One year from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Size

500 ml, 1 Ltr, 4 Ltr, 20 Ltr
Finish

SUPERIOR RED OXIDE PRIMER, ZINC PRIMER YELLOW
Size

200 ml, 500 ml, 1 Ltr, 4 Ltr, 20 Ltr
Colour

Black, Bright White, Brown, Bus Green, Dawn, Dawn Glown, Deep Orange, Glossy Red Yellow, Golden Yellow, Imp Crimpson, Light Grey, Mahogany, Mid Buff [JN3176], Mint Green [JN9318], Oxford Blue, P O Red, Phirozi, Royal Ivory, Signal Red, Sky blue, Smoke Grey, Yellow
Size

500 ml, 1 Ltr
Finish

Glossy, Matt, Satin
Size

500 ml, 1 Ltr
Size

1 Kg
Finish

Mahogany, Natural, Oak, Teak, Walnut
Size

200 ml, 500 ml, 1 Ltr, 4 Ltr, 20 Ltr
Colour

Black, Bright White, Brown, Bus Green, Dawn, Dawn Glown, Deep Orange, Glossy Red Yellow, Golden Yellow, Imp Crimpson, Light Grey, Mahogany, Mid Buff [JN3176], Mint Green [JN9318], Oxford Blue, P O Red, Phirozi, Royal Ivory, Signal Red, Sky blue, Smoke Grey, Yellow

Related products

  • Mel’Myn Plus Interior Wood Finish

    High end kitchen cabinetry, bathroom vanities, table tops, dining and bedroom furniture etc

    ₹510.00 – ₹2,050.00 Select options

  • Water Based 1K Exterior Wood Coating

    Perfect choice for dark colored commercial and household furniture, kitchen cabinetry

    ₹330.00 – ₹16,014.00 Select options

  • Jensolin Primer

    A solvent based undercoat promises perfect surface preparation for wooden surfaces

    ₹139.00 – ₹4,664.00 Select options
  • Sale!

    Water-based Impregnation Clear

    A transparent Coating used on saturated / weathered wood

    ₹180.00 – ₹350.00 Select options