Sheenlac Paint Remover is a solvent-based wax type stripper, acting on all types of paint films even on vertical substrate.
Direction of Use:
Make deep cuts on the old paint surface using a sharp edge knife / putty blade. Shake the content well before use. No dilution is required. Apply the paint remover by brush as a thin layer and allow it to react for 10-15 mins. Use a putty knife to remove the lifted area and use mild force to remove the loose paint. Repeat the procedure till you get to the bare substrate. After thorough removal of paint, use plenty of water and soap to rinse off and clean. If used on wood, wipe-off with cloth, soaked in Sheenlac Enamel/ N.C Thinner D-13x
Sheenlac Polyurethane Thinner D-67 is a blend of aromatic hydrocarbon, ester and ketone solvents suitable for dilution of solvent based polyurethane sealer, primer, clear and pigmented topcoat to obtain proper paint consistency for application.
Recommended Use:
Suitable for dilution of all types of solvent based polyurethane sealer, primer, clear and pigmented topcoat. It is also used for cleaning of tools immediately after application of polyurethane paints.
Jensolin Pink Primer, a solvent based undercoat promises perfect surface preparation for new and unpainted wooden surfaces. The product hides existing surface stains and discoloration. Glossy, Semi-glossy and flat oil finishes can be applied directly onto the surface, coated with this primer. It is specially formulated to provide an excellent balance between filling, penetration and adhesion to wood.