Description
|
Gloss level @ 60˚
|
Drying Temperature
|
Application method
|
Gloss: 90 | Matt: 15-20
@30˚ C and 60% RH
Spray|
Tack free
|
Surface Dry
|
Overcoat interval
|
3 Hours
10 - 15 minutes
8 -12 HoursRECOMMENDED USE: Aspire interior is the perfect choice for dark colored commercial and household furniture, high end kitchen cabinetry, bathroom vanities, doors, Table tops, Bar tops, music instruments, sports goods, and other interior wood surfaces that require a hard durable finish. Not recommend on light / pale colored wood.
PRODUCT BENEFITS:
DURABllllY: It forms a tough yet flexible film which resists cracking even at curved edges. Further its special chemistry imparts it good heat, stain and chemical resistance properties.
SUPERIOR GLOSS RETENTION: Opulence Interior Forms a clear non yellowing coat on your wooden interiors which accentuates their beauty for a long duration.
RESISTANCE: Opulence has high gloss, stain and heat resistance when compared to conventional wood finishes.
FllM FLEXIBILITY: Opulence forms and extremely flexible film on the surface of wood which resists cracking even on the curved edges.
*Recoat and drying period may vary under different conditions
SURFACE PREPARATION: All wood surfaces must be clean, firm and dry. Remove any oil, grease, mortar droppings, etc.
NEW WOOD: Sand in the direction of the grain, to a smooth finish with 150 followed by 220 grit paper. Remove dust with a damp cloth.
PREVIOUSLY VARNISHED WOOD IN GOOD CONDITION: Sand to obtain a smooth surface using 150 grit emery paper. Remove all sanding dust using a vacuum or cloth dampened with mineral spirits.
PREVIOUSLY VARNISHED WOOD IN POOR CONDITION: Strip completely by deep. sanding or by using Sheen lac Paint Remover. Rinse thoroughly with clean water. Deep sand to until there is no evidence of any residue. Remove dust with a damp cloth.
WOOD PREVIOUSLY COATED WITH WAX SEALER/OIL BASED WOOD PRESERVATIVE: Mechanically sand until there is no evidence of residue. Remove dust with a damp cloth.
PREVIOUSLY PAINTED WOOD: Strip old paint by deep sanding or by using Sheenlac Paint Remover. Rinse thoroughly with clean water. Sand bare wood to a smooth finish. Remove dust with a damp cloth.
DISCOLOURED OR WEATHERED WOOD: Remove discoloured or weathered layer by sanding with 100 grit paper and treat it with Sheenlac WB Impregnation clear. Dry it for 2 hrs and sand to remove the grain rise with #220 grit paper. Remove dust with a dry cloth followed by Wood stain colour, to prevent further discoloration and restore the natural colour.
FILLER: If required use Sheenlac NC or Oil based Wood filler. Remove the excess using 220 grit Emery paper and wipe with dry cloth.
STAIN THE WOOD: Adding stain to bare or stripped wood can both change the color and highlight the gtain pattern of any interior wood but this is an optional. Apply Sheenlac SB Wood stains directly on wood or can be mixed @10% max with base coat sealer to produce stained finishes.
NEW WOOD: Sand in the direction of the grain, to a smooth finish with 150 followed by 220 grit paper. Remove dust with a damp cloth.
PREVIOUSLY VARNISHED WOOD IN GOOD CONDITION: Sand to obtain a smooth surface using 150 grit emery paper. Remove all sanding dust using a vacuum or cloth dampened with mineral spirits.
PREVIOUSLY VARNISHED WOOD IN POOR CONDITION: Strip completely by deep. sanding or by using Sheen lac Paint Remover. Rinse thoroughly with clean water. Deep sand to until there is no evidence of any residue. Remove dust with a damp cloth.
WOOD PREVIOUSLY COATED WITH WAX SEALER/OIL BASED WOOD PRESERVATIVE: Mechanically sand until there is no evidence of residue. Remove dust with a damp cloth.
PREVIOUSLY PAINTED WOOD: Strip old paint by deep sanding or by using Sheenlac Paint Remover. Rinse thoroughly with clean water. Sand bare wood to a smooth finish. Remove dust with a damp cloth.
DISCOLOURED OR WEATHERED WOOD: Remove discoloured or weathered layer by sanding with 100 grit paper and treat it with Sheenlac WB Impregnation clear. Dry it for 2 hrs and sand to remove the grain rise with #220 grit paper. Remove dust with a dry cloth followed by Wood stain colour, to prevent further discoloration and restore the natural colour.
FILLER: If required use Sheenlac NC or Oil based Wood filler. Remove the excess using 220 grit Emery paper and wipe with dry cloth.
STAIN THE WOOD: Adding stain to bare or stripped wood can both change the color and highlight the gtain pattern of any interior wood but this is an optional. Apply Sheenlac SB Wood stains directly on wood or can be mixed @10% max with base coat sealer to produce stained finishes.
- Always keep paint out of reach of children.
- Ehsure good ventilation during application and drying.
- If accidental contact with skin should occur, wash immediately with soap and water.
- Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
- Harmful if swallowed. Seek medical attention and do not induce vomiting.
- Do not smoke while painting.
- Flammable. Store in a cool dry place away from heat and sparks.
- Refer to Material Safety Data Sheet for compiete information
Reviews
There are no reviews yet.