In Stock

Water Based Wood Polish

(1 customer review)

245.007,444.00

Sheenlac Water based (WB) Interior heavy duty wood polish is an easy-to-use product at an economical cost factor that dries very quickly to a crystal-clear film. It has very low environmental impact during and after application.

  • Odourless
  • Non-flammable
  • Durable
  • DIY product
500 ml
1 Ltr
20 Ltr
Glossy
245.00
480.00
7,444.00
Matt
245.00
480.00
7,444.00
Satin
245.00
480.00
7,444.00

Volume: 0 Ltr

Items: 0

Total: 0.00

Description

Drying Temperature

@30˚ C and 60% RH

Application method

Padding

Flash point

Above at 12° C

Touch Dry

2 minutes

Re-coating Interval

30 minutes

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

RECOMMENDED USE: Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

*Recoat and drying period may vary under different conditions
100-120 Sq ft / L / Coat *Actual coverage may vary based on the type of wood used and the application methodology.
Reveals the highlights of well grained timber. Good water resistance property. 100% Lead free. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
BARE WOOD: First, seal with one or two coats of NC wood filler and then apply four to five coats of Sheenlac Wood Polish. PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): First, seal with one coat of NC sanding sealer and then apply three or four coats of Sheenlac Wood Polish.
  1. Always keep paint out of reach of children.
  2. Ensure good ventilation during application and drying.
  3. If accidental contact with skin should occur, wash immediately with soap and water.
  4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
  5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
  6. Do not smoke while painting.
  7. Flammable. Store in a cool dry place away from heat and sparks.
  8. Refer to Material Safety Data Sheet for complete information.
Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage Shelf Life: 2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.
Wood polish is suitable for use on all types of soft and hardwood timber structures which is in less critical areas (where heat, water, scratch, stain and mar resistance is not critical). It can be used on all bamboo, cane and wooden surfaces including furniture, door, window, frame structures, stair rails and other professional work. Not recommended for exterior use due to its limited UV Resistance.

1 review for Water Based Wood Polish

  1. Shashwat

    Nice

Add a review

Your email address will not be published. Required fields are marked *