Sheenlac Water based (WB) Interior heavy duty wood polish is an easy-to-use product at an economical cost factor that dries very quickly to a crystal-clear film. It has very low environmental impact during and after application.
Sheenlac Water based PU exterior wood coating is an 1K PU clear designed to provide excellent protection for all types of outdoor wood projects from UV rays, weathering, temperature changes and humidity.
Water Based Timber Filler is an alkyd based, semi solid paste that fills minor imperfections on the surface and improves top coat adhesion and appearance.
RECOMMENDED USE: Water based timber filler is mostly used on wooden surfaces.
WRITE-OFF is a two-pack water-based coating which can convert almost any paintable surface into an easy erase white board by use of appropriate primers and surface preparation methods. It can be applied on dry wall, wood, cement and metal. Erasable writing space created of WRITE-OFF has great ease of legible writing with white board markers and leave no ghosting marks after erasing.
Sheenlac Paint Remover is a solvent-based wax type stripper, acting on all types of paint films even on vertical substrate.
Direction of Use:
Make deep cuts on the old paint surface using a sharp edge knife / putty blade. Shake the content well before use. No dilution is required. Apply the paint remover by brush as a thin layer and allow it to react for 10-15 mins. Use a putty knife to remove the lifted area and use mild force to remove the loose paint. Repeat the procedure till you get to the bare substrate. After thorough removal of paint, use plenty of water and soap to rinse off and clean. If used on wood, wipe-off with cloth, soaked in Sheenlac Enamel/ N.C Thinner D-13x
Sheenlac Polyurethane Thinner D-67 is a blend of aromatic hydrocarbon, ester and ketone solvents suitable for dilution of solvent based polyurethane sealer, primer, clear and pigmented topcoat to obtain proper paint consistency for application.
Recommended Use:
Suitable for dilution of all types of solvent based polyurethane sealer, primer, clear and pigmented topcoat. It is also used for cleaning of tools immediately after application of polyurethane paints.
Sheenlac Mel’myn Plus acid catalyzed melamine finish is a solvent based 2 pack, high solids, alkyd/urea formaldehyde acid catalyzed wood polish. The product is developed for ease of use, in different gloss levels with low formaldehyde emission during application and drying and from the cured film.
Opulence Interior PU is an acrylic based 2 pack polyurethane clear wood coating. It forms and tough, non-yellowing film that accentuate the nature beauty of interior wooden surface. Resilient and durable for years Great balance of hardness and flexibility Excellent chemical and mechanical resistance.